RAM CHASSIS CAB 3500 2017, User Manual

Page: 69 / 276

LO-level after a maximum of 60 minutes of continuous operation. At that time, the
number of illuminated LEDs changes from two to one, indicating the change. The
LO-level setting will turn off automatically after a maximum of 45 minutes.
WARNING!
• Persons who are unable to feel pain to the skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other
physical conditions must exercise care when using the seat heater. It may cause
burns even at low temperatures, especially if used for long periods of time.
• Do not place anything on the seat that insulates against heat, such as a blanket
or cushion. This may cause the seat heater to overheat. Sitting in a seat that has
been overheated could cause serious burns due to the increased surface
temperature of the seat.
Ventilated Seats — If Equipped
Located in the seat cushion are small fans that draw the air from the passenger
compartment and move air through fine perforations in the seat cover to help keep
the driver and front passenger cooler in higher ambient temperatures. The fans
operate at two speeds, HI and LO.
The front ventilated seats control buttons are located on the center instrument panel
below the climate controls.
If your vehicle is equipped with a touchscreen, the front ventilated seats control
buttons are also located within the climate or controls screen of the touchscreen.
• Press the ventilated seat button once to choose HI.
• Press the ventilated seat button a second time to choose LO.
• Press the ventilated seat button a third time to turn the ventilated seat off.
NOTE:
The engine must be running for the ventilated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the ventilated seats can be
programmed to come on during a remote start.
If your vehicle is equipped with a touchscreen, this feature can be programmed through
the Uconnect system. Refer to “Uconnect Settings” in “Understanding Your Instrument
Panel” in the Owner’s Manual on www.ramtrucks.com/en/owners/manuals for further
information.
If your vehicle is not equipped with a touchscreen, this feature can be programmed
through the instrument cluster display. Refer to “Instrument Cluster Display” in “Under-
standing Your Instrument Panel” in the Owner’s Manual on www.ramtrucks.com/en/
owners/manuals for further information.
G E T T I N G S T A R T E D
67