94
GETTING TO KNOW YOUR VEHICLE
Released Position
Hold The Bumper And Push The Handle Up
8. Holding the bumper, push the fully released
latch to the center and push up. Push the
handle firmly, locking it into the stowed
position. Repeat Steps 2 & 3 for the opposite
side latch.
9. With two people, remove the cover.
T
RI
-F
OLD
T
ONNEAU
C
OVER
I
NSTALLATION
To install the Tonneau Cover follow these steps:
1. Position the Tonneau Cover on the truck bed
and center using the locating bumpers.
2. Locate the front pair of Tonneau Cover latches
on the underside of the Cover. Slide the
locking lever toward the inside of the truck bed
and release the latch from the stowed
position, and pull the handle downward into
the released position. Do this for both the left
and right side.
Location of Front Latches
Slide Locking Lever Towards Inside Of Truck
Unlatching Latch
