6
Setting the start times
You can set up to eight start times for each program, but it is not necessary for you to
use all eight start times with each program. After you enter all the start times, the
transmitter will automatically organize the start times in chronological order, from
00:00 to 23:59 or 12:00 AM to 11:59 PM.
To set the start time:
1. Make certain the icon is visible on the display.
If it is not, press repeatedly to cycle through the
menu system and display the icon.
2. Press repeatedly until the program you desire (A, B, or C) appears in the dis-
play.
3. Use and to set the first start time.
4. Press to move to the next start time.
5. Repeat steps 3 and 4 until you have set all of the start times you desire (up to eight
per program) for the program.
6. If you would like to set start times for additional programs, press until the pro
gram you desire is displayed. Then repeat steps 3 and 4.
7. When you have finished setting the start times, press to move to the icon,
Setting the Watering Time Length display.
Deleting a start time
To delete a start time:
1. Press to advance to the icon.
2. Press to change to the appropriate program.
3. Press to scroll through the start times and decide which one to delete (the start
times will be in chronological order).
4. Again, scroll through the start times and pause on the start time just before the time
you wish to delete.
5. Press and hold . The start time will flash momentarily on the display, signaling its
cancellation, and then change to --.--.
Note:
It is a common misunderstanding that a start time of 00:00 is “off.” It is
actually a midnight start time. An “off” time is indicated by --.-- in the display.
Setting the run time per station
You can set the run time for each station from 0 to 12 hours (in one minute incre-
ments). All One Station Control Modules must be programmed on station 1. Multi-
station Control Modules (Two Station and Four Station) must be programmed starting
on station 1. For example, on a Four Station Control Module, programming would start
on station 1, then station 2, 3 and 4.
