9
Activating a Control Module’s On-off Mode
To activate the On-off Mode (or turn the Control Module’s default mode to OFF):
1. Press on the Field Transmitter repeatedly until the icon is dis-
played.
l
If the On-off Mode is deactivated, you will see the icon, indicating that
the Control Module will water according to current programming.
l
If the On-off Mode is activated, you will see the icon, indicating that all
Control Module programs have been overridden and no watering will take place.
2. If the icon is displayed, press .
The Field Transmitter sends the irrigation OFF command to the Control Module. An
X will appear on the sprinkler icon .
Deactivating a Control Module’s On-off Mode
To deactivate the On-off Mode (or turn the Control Module’s default mode on):
1. Press on the Field Transmitter repeatedly until the icon is dis-
played.
l
If the On-off Mode is deactivated, you will see the icon, indicating that
the Control Module will water according to current programming.
l
If the On-off Mode is activated, you will see the ,indicating that all Con-
trol Module programs have been overridden and no watering will take place.
2. If the icon is displayed, press .
The Field Transmitter sends the irrigation ON command to the Control Module. The
X on the icon disappears.
Verifying the On-off Mode
To check the Control Module’s On-off status:
1. Plug the Field Transmitter’s optical connector into the Control Module’s optical con
- nector.
2. If the Field Transmitter’s display is blank, press .
3. Press on the Field Transmitter to receive (upload) the program data stored in
the Control Module.
4. Press on the Field Transmitter repeatedly until the icon is displayed.
·
l
If the On-off Mode is deactivated, you will see the icon, indicating that
the Control Module will water according to current programming.
·
l
If the On-off Mode is activated, you will see the icon, indicating that all
Control Module programs have been overridden and no watering will take place.
