Rain Bird MDC2, Instructions Manual, Page: 60 / 124

54
Creating Irrigation Schedules,
continued
54
Manually Activating a Decoder
The MDC2 Controller allows you
to activate programmed decoders manually.
1. From the Main Operating Screen , select
Manual . The Manual label is highlighted and
you are asked to Select Program or Decoder .
The display also shows the number of Active
Decoders .
2. Select
Dec
.
3. Scroll through the list of programmed decoders.
Choose a decoder and select
OK
.
4. Use the up and down arrows to program how
long you want the decoder to be active and
select
OK .
Note: The display now shows the number of Active
Dec .
, displaying only one at a time. The
sprinkler
icon starts to “sprinkle.”
5. Follow steps (2-4) to manually activate more
decoders.
6. Use the
up
and
down arrows
to scroll through
each Active Decoder .
Manually Stopping an Active Decoder
1. From the
Active Decoder Screen
, select
Dec
.
2. Scroll through the list of Active Decoders to
reach the one you want to stop and select the
minus(-) label. The Active Decoder Screen now
shows one less decoder.
3. Select
Manual
to stop all the manually
activated decoders and return to the
Main
Operating Screen
.
Note : Please note that you do not need to perform
Step 3 . if your controller is in Auto mode.
G1 >007 Min<
4 Active Dec.
14:02:30
OK –
F1 013 Min
3 Active Dec.
14:02:30
Dec. Pause Manual Prog.