Rain Bird MDC2, Instructions Manual, Page: 50 / 124

Creating Irrigation Schedules,
continued
44
Deleting Steps
1. From the Main Operating Screen , select Sched.
then Step .
2. Scroll
up
or
down
to the
Step
(s) you want to
delete.
3. Move the marker to the Delete field and select
OK . The previous Step now shows on the
display screen and all the successive Steps move
back one.
Note: Selecting the minus (-) label while in a
non-active
Decoder
field (indicated with
right
and
left arrow labels) or an active Minute’s field
(indicated with
up
and
down arrow
labels) deletes
the information you programmed into that field.
4. Select Step to return to the Schedule Set-up
Screen .
Selecting the Days
Each Program runs on a 14-day cycle. You can set
each individual
Program
(or
Schedule
) to run on
any day in the cycle. The programming repeats itself
after 14 days.
1. From the Main Operating Screen , scroll to the
Program you want.
2. Select
Sched.
then
Day
to activate the 14-day
Schedule
. The blinking
markers
and
box
show
the field is active. The
Day
label is highlighted.
3. Move the blinking box to each day you want to
irrigate and select OK to schedule that day.
Example: If you want to irrigate every M onday,
W ednesday, F riday and S unday, move the box to
those days in the 14-day Schedule and select the
days you want or delete the days you do not want to
include in the
Schedule . Select the minus (-) labels
to delete days (not water on those days) or use the
right and left arrow labels to move to each day you
want to water and select OK to program those days.
4. When you are finished, select
Day
to return to
the
Schedule Set-up Screen
.
Program 3 Total 2 : 11
13 ---- 013Min OK Insert >Delete<
Repeat 0 times
OK –
14:02:30
Program 4 Total 1 : 57
15> FSSMTWTFSSMTW< (0) -- : -- 100% P
Repeat 0 times
OK –
14:02:30
Day