SA 25
SA 25
SA 25
SA 25
SA 25
Chapter 4
Use of the commands
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: [email protected]
Use and Maintenance Manual
Page 25/44-4
4.4 Diamond blade sharpening
When you notice that during cutting the blade “sparks”, that at the end of cutting it “breaks” the tile and that advancement
requires too much of an effort, the blade shall be dressed making repeated cuts on the dressing stone.
4.5 Perpendicularity adjustment (90°) of the motor/trolley group
FOR THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
With the motor group positioned in perpendicular cutting position, place a 90° square on the trolley work bench and put it
near the blade.
Loosen the handle, loosen the nut
(A)
by means of CH13 wrench. By means of 4 mm hexagon wrench screw or unscrew
the screw
(B)
until the perfect blade-square alignment is reached.
A
B
