Bib
Bib
Bib
Bib
Bibulldo
ulldo
ulldo
ulldo
ulldog
g
g
g
g AD
AD
AD
AD
ADVVVVV
Chapter 5
Maintenance interventions
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: [email protected]
Use and Maintenance Manual
Page 29/44-5
5.1 Cleaning the machine
TO CARRY OUT THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
NEVER USE BLASTS OF WATER. INSTEAD USE A DAMP SPONGE. KEEP THE CARRIAGE GUIDE CLEAN
(DO NOT USE GREASE).
Lubrication
Grease, on a regular basis:
- The grinding wheel holder in the point where the flange/chuck come into contact.
- the vertical adjustment guide.
5.2 Tank emptying and cleaning
Place a bucket underneath the tank, close to the drain hole. Remove the plug (
A
) and let dirty water outflow. Remove the pump
(
B
) from the tank. Then clean the tank thoroughly.
TO CARRY OUT THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS.
TO CARRY OUT THIS OPERATION, WEAR THE PROTECTIVE GLOVES AND ACCIDENT-PREVENTION
SHOES.
DISPOSAL OF WATER CONTAINED WITHIN THE TANK SHALL BE MADE IN COMPLIANCE WITH THE
LAWS IN FORCE IN THE COUNTRY OF USE.
FOR A CORRECT OPERATION OF THE PUMP, WATER SHALL BE KEPT CLEAN.
UPON EACH TANK WATER CHANGE, CLEAN THE FILTER AND THE PUMP ROTOR.
B
A
TO CARRY OUT THIS OPERATION, WEAR THE PROTECTIVE GLOVES AND ACCIDENT-PREVENTION
SHOES.
