Bib
Bib
Bib
Bib
Bibulldo
ulldo
ulldo
ulldo
ulldog
g
g
g
g AD
AD
AD
AD
ADVVVVV
Chapter 5
Maintenance interventions
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: [email protected]
Use and Maintenance Manual
Page 33/44-5
MAKE SURE THE STARTER VOLTAGE CORRESPONDS TO THE MACHINE SUPPLY VOLTAGE.
5.6 Recycle pump replacement
AFTER THE REPLACEMENT, MAKE SURE THE CONNECTIONS IN THE TERMINAL BOARD HAVE BEEN
MADE CORRECTLY.
TO CARRY OUT THIS OPERATION, WEAR THE PROTECTIVE GLOVES AND ACCIDENT-PREVENTION
SHOES.
FOR THIS OPERATION, MAKE SURE THE MACHINE IS NOT CONNECTED TO THE MAINS AND THE TANK
IS EMPTY.
Empty the tank. Open the terminal block cover of the main electric motor (
A
). Unplug the pump’s power supply cable.
Disconnect the water delivery hoses (
B
). Replace the damaged pump with a new one, and restore connections. Close the
terminal board cover, paying attention not to crush the wires. Reconnect the delivery hoses.
A
B
