mod. BIBULLDOG ADV
© Raimondi S.p.a.
machines & tools for the tile & stone professional
Chapter 4
Use of the commands
Page 26/44-4
4.8 Sequence of wheels
The Bibulldog ADV profiling machine is equipped with two motor groups (
A
) and
(
B
) in series to allow execution of two different processing phases in a single
pass.
IN CASE A SINGLE TOOL IS TO BE USED, THE SECOND TOOL HAS TO BE ADJUSTED TO PREVENT ITS
INTERFERENCE WITH THE MATERIAL TO BE PROFILED.
B
A
Profiling
To profile materials having high thickness or being very hard we suggest to carry out prfiling using two wheels to be ajdusted
at two different heights.
The first wheel is ‘high’ and carries out a partial profilingm the second hweel is ‘low’ and completes the profiling.
THE AMOUNT OF MATERIAL PROFILED IN THE DIFFERENT PASSES HAS TO BE THE SAME.
45° jolly cut
Semi round cut
