RAIMONDI BIBULLDOG ADV, Use And Maintenance Manual

Page: 3 / 44

Bib Bib
Bib Bib
Bibulldo
ulldo
ulldo ulldo
ulldog
g
g g
g AD
AD
AD AD
ADVVVVV
Chapter 1
Introduction
© Raimondi S.p.a.
Via dei Tipografi, 11 - 41100 Modena (Italia)
Tel.: +39.059.280.888 - Fax: +39.059.282.808
www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it
Use and Maintenance Manual
Page 3/44-1
1.1 Declaration of conformity
The RAIMONDI S.p.A. company, with headquarters in Modena, Italy, Via dei Tipografi 11, represented by Mr.Ivan Raimondi
as Legal Representative, declares under its sole responsibility that the machine named BIBULLDOG ADV, this declaration
refers to, complies with the law provisions
transposing the following Directives:
98/37/EEC Machinery Directive
73/23/EEC Low voltage Directive
89/336/EEC Electromagnetic compatibility Directive
92/59/EEC Directive on general product safety
85/374/EEC Directive on Liability for defective products
Besides, it shall also be noted that, in the design and construction phases, the following technical standards have been
complied with:
EN 12100-1 “Safety of machinery - Basic concepts, general principles for design: Terminology, methodology”
EN 12100-2 “Safety of machinery - Basic concepts, general principles for design: Technical principles”
EN 294 “Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs”
EN 418 “Emergency stop equipment”
EN 349 “Safety of machinery - Minimum gaps to avoid crushing of parts of the human body”
EN 1050 “Safety of machinery - Principles for risk assessment”
EN 842 “Safety of machinery - Visual danger signals - General requirements, Design and Testing”
EN 981 “Safety of machinery - System of auditory and visual danger and information signals”
EN 1037 “Safety of machinery - Prevention of unexpected start-up”
EN 811 “Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs”
EN 894-1 “Safety of machinery - Ergonomics requirements for the design of displays and control actuators
Part 1: general principles for human interactions with displays and control actuators”
EN 894-2 “Safety of machinery - Ergonomics requirements for the design of displays and control actuators
Part 2: Displays”
EN 894-3 “Safety of machinery - Ergonomics requirements for the design of displays and control actuators
Part 3: Control actuators”
EN 953 “Safety of machinery - General requirements for the design and construction of fixed and movable
guards”
EN 60204-1 “Electrical equipment of machines”
UNI EN 12418 “Masonry and stone cutting-off machines for job site. Safety”
Modena 17/10/2008 Mr. Ivan Raimondi