Raider GARDEN TOOLS RD-SBM01, User Manual

Page: 45 / 102

45
SPEED OIL DRAINING
1. Turn off the engine.
2. Turn off the candle.
3. Keep the collection container under the gearbox oil drain
plug.
4. Unscrew and remove the gearbox oil filler plug (Fig. 21A)
and
the transmission oil drain plug (Fig. 21B) using a suitable tool.
5. Allow the gearbox oil to drain completely.
6. Install the gear oil drain plug and tighten with a suitable tool.
7. Top up the gearbox oil and replace the stopper and close
it well.
ENGINE MAINTENANCE PLAN FOR INSPECTION AND
MAINTENANCE FOR FIRST 5 HOURS OF WORK
X
Check the fastening of all nuts.
X
Смяна на масло в двигателя.
ALL 25 HOURS OF WORK
1. Check the fastening of all nuts.
2. Engine oil change.
3. Checking the engine oil condition.
4. Clean the exhaust air environment.
5. Cleaning the air filter.
6. Checking, cleaning and possible replacement of the
candle. *
FOR EVERY 100 HOURS OF WORK
X
Spark Plug Replacement. *
X
Check the condition of the fuel hose.
X
Check the carburetor adjustment. **
Highlighted items:
* See instructions.
** These operations must be carried out at an authorized
service center.
OIL CHANGE
It is advisable to request an authorized oil change service.
The first oil change must be done after 5 working hours, and
when working under heavy load a second change should be
made after 25 working hours.
Drain the engine oil when the engine is warm. The warm oil
drains quickly and completely.
CAUTION: DO NOT DRAIN THE OIL WHEN THE
ENGINE IS RUNNING!
When draining the oil from the upper filler pipe, the fuel tank must
be empty or the fuel may leak out and cause a fire or explosion.
1. Place a suitable container near the engine to catch the used oil.
2. Remove the oil dipstick / oil dipstick (Fig. 22A).
3. Remove the drainage screw - if any - and allow the used oil to
drain completely
into the container.
4. For an engine without a drain plug, we recommend using an oil
extraction pump,
or drain the oil into the container by tilting the engine slightly to
the cap
/ oil dipstick (Fig. 23). Remove forests before tilting the machine
vote from the tank. Hold the appliance with the end of the spark
plug motor up.
5. Replace the drain screw. When the engine is in a level position,
fill to the top
border marking on the cap / dipstick.
6. Replace the oil cap / dipstick.
Please dispose of used engine oil in an environmentally compatible
manner. We recommend that you take the used oil in a sealed
container to your local recycling center or reclamation service. Do
not throw it in the bin, or throw it on the ground or in the sewer.
Low engine oil may cause the engine to run
damage to the engine.
Wash your hands with soap and water after handling used oil.