Ragazzini RC2-Mxl, Instructions For Use Manual

Page: 15 / 47

INSTRUCTIONS FOR USE
15
LM05EN002
C.7 Protective measures to be taken by the user
C.7.1
Personal Protective Equipment
To safeguard the operator's health in the various stages of the machine's life cycle, it is mandatory to use
(or have available) the PPE (Personal Protective Equipment) mentioned below. The manufacturer obliges
the Customer to use the machine with PPE compliant with the directive on Personal Protective Equipment
duly provided with the CE marking. The operator must comply with the directive that defines the methods
of use of personal protective equipment during work. Since it is impractical to predict all possible machine
operating conditions, the PPE listed refer only to the use of the machine: the employer must prescribe the
use of any additional PPE required in compliance with the actual situation in their production site.
PPE to be used in the various stages of the machine's life cycle
Pictogram
Description Stage of the life cycle of the machine Note
FOOTWEAR

transportation;

installation;

use;

maintenance;

dismantling and demolition
Use of safety shoes to avoid the risks
generated by falling materials.
DIELECTRIC
FOOTWEAR
WITHOUT
METALLIC PARTS
FOR
ELECTRICIANS

maintenance on electrical parts
Use of insulating footwear to prevent the
dangers that can be generated by direct or
indirect contacts.
PROTECTIVE
GLOVES

transportation;

installation;

maintenance;

dismantling and demolition
Gloves for hand protection available in case of
manipulation of objects that can cause damage
or injuries.
INSULATING
PROTECTIVE
GLOVES

maintenance on electrical parts
Use of insulating protective gloves to prevent
the dangers that can be generated by direct or
indirect contacts
HELMET

transportation;

installation;

use;

maintenance;

dismantling and demolition
Protective helmet to be used during machine
hoisting operations to prevent the dangers
generated by hanging loads.
SUITABLE
CLOTHING

transportation;

installation;

use;

maintenance;

dismantling and demolition
Suitable clothing, such as overalls: it is
prohibited to wear wide sleeves and/or loosen
clothing that could be easily caught in
mechanical parts.
FACE SHIELD

maintenance
Face protective shield during work on parts of
the system and on electrical parts, especially if
live.
WARNING: The machine does not exceed the noise level established by law; therefore
hearing protection earmuffs are not mandatory.
However, the operator must also carefully evaluate the environment of use: if it is very noisy,
protective earmuffs must be used. When using protective earmuffs, the operator must pay
even more attention, as one of the senses of perception of danger (hearing) is missing.
Observe the surrounding environment well, as the visual perception must compensate for the
lacking sense of hearing.