INSTRUCTIONS FOR USE
25
LM05EN002
G.2
PERSONAL PROTECTIVE EQUIPMENT
The operator responsible for normal operation of the pump must use the following personal protective
equipment:
Pictogram
Description
Note
FOOTWEAR
Use of safety shoes to avoid the risks generated by falling materials.
PROTECTIVE GLOVES
Gloves for hand protection available in case of manipulation of objects
that can cause damage or injuries.
SUITABLE CLOTHING
Suitable clothing, such as overalls: it is prohibited to wear wide sleeves
and/or loosen clothing that could be easily caught in mechanical parts.
WARNING:
The machine does not exceed the noise level established by law; therefore
hearing protection earmuffs are not mandatory.
However, the operator must also carefully evaluate the environment of use: if it is very noisy,
protective earmuffs must be used. When using protective earmuffs, the operator must pay
even more attention, as one of the senses of perception of danger (hearing) is missing.
Observe the surrounding environment well, as the visual perception must compensate for the
lacking sense of hearing.
G.3
EMERGENCY STOP
If dangerous situations should occur during machine operation:
For the operator;
For exposed persons;
For the machine,
Stop the machine immediately by means of the red emergency stop push-button located on the main
control panel.
HAZARD
:
If the machine is not supplied in the configuration with electrical panel, it is the cu
stomer’s
responsibility to equip it with an emergency stop push-button.
G.3.1
Reset after an emergency stop
Once the problem that made the emergency stop necessary has been resolved, proceed as follows:
Reset the emergency stop push-button that has been activated by rotating it in the direction indicated
by the arrow on the button.
Restore the safety conditions needed to restart the machine;
After checking for the absence of hazardous situations, the authorised operator can resume use of the
machine.
