INSTRUCTIONS FOR USE
19
LM05EN002
E.3
TRANSPORTATION
The pump must be handled by means of a suitable mechanical hoisting device.
The pump is protected by a packaging consisting of a rigid bottom (pallet) and a cardboard casing.
The materials that make up the packaging are recyclable.
E.4
HOISTING
To hoist the pump, where necessary, use special straps by applying them as shown in the figure (lifting
with overhead crane or crane).
E.5
POSITIONING AND FIXING THE MACHINE
E.5.1
POSITIONING OF THE PUMP, VERSION WITH WHEELS
The pumps supplied with wheeled frame are equipped with steering wheels with handle. To position the
pump in the place intended for operation, use the handle and manually pull or push the pump.
HAZARD:
It is forbidden to connect the pump to other machinery in order to move the pump.
The machine stops by rotating the steering wheels with respect to the fixed wheels.
The rear wheels can be equipped with an optional built-in brake.
E.5.2
POSITIONING AND FIXING OF THE PUMP, VERSION WITH FIXED FRAME (OPTIONAL)
Firmly fix the pump to a fixed structure using the dedicated holes on the frame.
Install the pump on anti-vibration mounts in order to reduce vibrations.
E.6
STORAGE
Do not store the machine outdoor, in areas exposed to bad weather or very humid.
For storage periods longer than 60 days, protect any coupling surfaces with suitable antioxidant products.
The ball valves and the spare caps must be stored in a dry environment with no direct light.
