PROGRAMMING OF MULTIRAE
4 - 46
4.8.4 Change PID Lamp Type
This programming menu only applies to the monitor which is
equipped with a PID detector option. There are two
different energy UV lamps available for the PID sensor:
10.6 eV
and
11.7 eV
. The user can select either lamp from
the programming menu.
1. “Change PID Lamp Type?” is the fourth sub-menu item in
Table 4.7.
2. Press the
[Y/+]
key, the display shows the current PID
lamp selection: “PID Lamp = 10.6 eV?”
3. Press the
[Y/+]
key to accept the currently displayed PID
lamp. Press
[N/-]
key to change to the other lamp. Press
[MODE]
key to exit this sub-menu and return to the first
sub-menu.
4. If there is any change to the existing selection, pressing
the
[Y/+]
key the display will show “Save?” Then, press
the
[Y/+]
key to accept the
[N/-]
key to discard and return
to the first sub-menu.