PROGRAMMING OF MULTIRAE
4 - 6
5. If the correct digit value is not “0”, use the
[Y/+]
key or
[N/-]
key to increase or decrease the digit value. Then
press
[MODE]
key momentarily to confirm the digit
value. Display shows the actual digit entered and moves
the flashing cursor to the next digit (to the right).
6. Repeat Step 5 until all four digits are entered. Press and
hold
[MODE]
for one second.
7. If the entered password is correct, the monitor enters the
programming menu. The first menu item “Calibrate
Monitor?” will be displayed.
8. If the password is incorrect, the display shows “Wrong
Password???” and returns to the regular display of
instantaneous gas readings.
9. If the User mode is set to
display
mode, a message
“Display Only! Cannot enter....” will be shown.
