Rae MultiRAE PLUS PGM-50, Operation And Maintenance Manual, Page: 15 / 184

GENERAL INFORMATION
1 - 3
Multi-Gas Monitor Specification
(Continued)
Alarm Settings: Separate alarm limit settings for TWA,
STEL, Low and High alarm.
Range, Resolution and Response Time (t
90
diffusion):
CO 0-500 ppm 1 ppm 20 sec
H
2
S 0-100 ppm 1 ppm 30 sec
SO
2
0-20 ppm 0.1 ppm 15 sec
NO 0-250 ppm 1 ppm 20 sec
NO
2
0-20 ppm 0.1 ppm 25 sec
Cl
2
0-10 ppm 0.1 ppm 60 sec
O
2
0-30 % 0.1 % 15 sec
VOC 0-200 ppm 0.1 ppm 10 sec
VOC 200-2000 ppm 1 ppm 10 sec
LEL 0-100 % 1 % 15 sec
HCN 0-100 ppm 1 ppm 60 sec
NH
3
0-50 ppm 1 ppm 150 sec
PH
3
0-5 ppm 0.1 ppm 60 sec
Alarm: 90 dB buzzer and flashing red LED to
indicate exceeded preset limits, low
battery, or sensor failure.
Calibration: Two point field calibration for fresh air
and standard reference gases.
Attachment: Rubber boot, wrist strap, belt clip.
Sampling Pump: Internal integrated with 300 cc/min flow
rate (high setting).
Protection: Password protected calibration settings,
alarm limits, and data.