manualshive.com logo in svg

Rae MiniRAE Lite, User Manual

Share
Download
Rae MiniRAE Lite User Manual Download Page 53

MiniRAE Lite User’s Guide 

30  Updating Firmware From A  

Computer 

You can connect the Travel Charger or optional Charger Stand to a 
PC and transfer updated firmware to the instrument (should this ever 
be necessary). 
 

Uploading Firmware To The instrument From 
A PC 

Uploading new firmware to your instrument requires connecting the 
instrument and PC via the Travel Charger or optional Charger Stand. 
It also requires RAE Programmer 7000 software, which is available 
by downloading ProRAE Studio version 1.12 from the RAE Systems 
website (www.raesystems.com). Follow these steps to make the 
connection: 

 

1.

 

Connect the data cable to the PC and the charger/cradle. 

2.

 

Place the instrument into the charger/cradle. The charging 
LED should be illuminated. 

3.

 

Start RAE Programmer 7000 on your PC. 

4.

 

Select “Operation” and select Setup Connection. 

5.

 

Select the COM port to establish a communication link 
between the PC and the instrument. 

6.

 

Select Operation 

Æ

 Download Firmware. 

 
Once communication is established, follow the software’s instructions 
to upload the new firmware to your instrument. 
 

Note: 

Check for the latest updates to ProRAE Studio at 

www.raesystems.com. 

51 

Summary of Contents for MiniRAE Lite













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands