manualshive.com logo in svg

Radware DefensePro 6.02, User Manual, Page: 70 / 339

Share
Download
Radware DefensePro 6.02 User Manual Download Page 70

DefensePro User Guide

 

Basic Device Configuration

70

 

Document ID: RDWR-DP-V0602_UG1201

Configuring a High-Availability Cluster in the System Tab

In the Configuration perspective system pane, you can configure the basic parameters of a cluster 
(Cluster Name, Primary Device, and Associated Management Ports). 

Note:

Before you can configure a cluster, the devices must be locked.

To create a DefensePro high-availability cluster from the system pane

1. In the Configuration perspective system pane.
2. Select a DefensePro device.
3. Press Ctrl and click the other device for the cluster.
4. Right-click one of the selected devices and select Create Cluster.
5. Configure the parameters; and then click OK.

To break a DefensePro high-availability cluster from the system pane

In the Configuration perspective system pane, right-click the cluster node and select Break 
Cluster.
After your confirmation, the cluster node is removed from the tree, and the DefensePro devices 
are displayed under the parent node.

To rename an DefensePro high-availability cluster from the system pane

1. In the Configuration perspective system pane, right-click the cluster node, and select Rename 

“<Cluster Name>”. 

2. Rename the cluster (up to 32 characters); and then, click outside the cluster node.

Cluster Setup Parameters

Parameter

Description

Cluster Name 

The name for the cluster (up to 32 characters). 

Primary Device

Specifies which of the cluster members is the primary device.

Associated Management Ports

Specifies the management (MNG) port or ports through which the 
primary and secondary devices communicate.
Values: MNG1, MNG2, MNG1+2 

Note: 

You cannot change the value if the currently specified 
management port is being used by the cluster. For 
example, if the cluster is configured with MNG1+2, and 
MNG1 is in use, you cannot change the value to MNG2.

Summary of Contents for DefensePro 6.02




















































































































































































































































































































































Reviews:

No comments