Radware DefensePro 6.02, User Manual, Page: 165 / 339

DefensePro User Guide
Security Configuration
Document ID: RDWR-DP-V0602_UG1201
165
Managing the Quarantine Warning Page
When Quarantine Warning is the specified Web Quarantine Action, the device returns the default
message or the specified, Custom HTML Page for outbound Web traffic from the quarantined internal
hosts.
The device sends the hard-coded, default quarantine-warning page under the following
circumstances:
• No file has been specified.
• The specified file is invalid.
The code for the quarantine-warning page can be up to 750 bytes long.
To set the code for the quarantine-warning page
1. In the Configuration perspective Network Protection tab navigation pane, select Signature
Protection > Web Quarantine > Quarantine Actions.
2. Do one of the following:
— To add an entry, click the (Add) button.
— To edit an entry, double-click the row.
3. Click Upload Custom HTML Page.
4. Configure the parameters; and then, click OK.
Aging (Hours) The number of hours that the device quarantines all Web traffic from
the internal hosts in a protected network segment after matching a
signature.
Values:
• 0–168—That is one week. The value 168 is valid only if the value
for the Aging (Minutes) is 0.
• When Aging (Hours) and Aging (Minutes) are both 0 (zero),
the device quarantines the Web traffic indefinitely.
Aging (Minutes) The number of minutes that the device quarantines all Web traffic
from the internal hosts in a protected network segment after matching
a signature.
Values:
• 0–59—The maximum Aging time (hours + minutes) cannot
exceed 168 hours, 0 minutes.
• When Aging (Hours) and Aging (Minutes) are both 0 (zero),
the device quarantines the Web traffic indefinitely.
Table 83: Quarantine Action Parameters
Parameter Description