DefensePro User Guide
Security Configuration
176
Document ID: RDWR-DP-V0602_UG1201
Packet Report
Enables logging a copy of the filtered packet.
Default: Disabled
Risk
The risk assigned to this attack for reporting purposes.
Values: High, Info, Low, Medium
Default: Medium
Suspend Action
Specifies which session traffic the device suspends for the attack
duration.
Values:
•
None—Suspend action is disabled for this attack.
•
Source IP—All traffic from the IP address identified as the source
of this attack is suspended.
•
Source IP + Destination IP—Traffic from the IP address identified
as the source of this attack to the destination IP address under
attack is suspended.
•
Source IP + Destination Port—Traffic from the IP address
identified as the source of this attack to the application
(Destination port) under attack is suspended.
•
Source IP + Destination IP and Port—Traffic from the IP address
identified as the source of this attack to the destination IP
address and port under attack is suspended.
•
Source IP and Port + Destination IP and Port—Traffic from the IP
address and port identified as the source of this attack to the
destination IP address and port under attack is suspended.
Default: None
Note:
When Tracking Type is set to Target Count, the Suspend
Action can only be set to None.
Packet Reporting and Trace Setting
Packet Report
Specifies whether the device sends sampled attack packets to
APSolute Vision for offline analysis.
Default: Disabled
Note:
When this feature is enabled here, for the feature to take
effect, the global setting must be enabled (Configuration
perspective > Advanced Parameters > Security
Reporting Settings > Enable Packet Reporting).
Packet Trace
Specifies whether the DefensePro device sends attack packets to the
specified physical port.
Default: Disabled
Caution:
When this feature is enabled here, for the feature to take
effect, the global setting must be enabled
(Configuration perspective > Advanced
Parameters > Security Reporting Settings > Enable
Packet Trace). In addition, a change to this parameter
takes effect only after you update policies.
Table 90: Connection Limit Protection Parameters
Parameter
Description
Summary of Contents for DefensePro 6.02
