[1] Product test
-
Product code and name
Qn
-
Product nominal mass
TARE
-
Tare value attributed to the product
PUT 1 / 30
-
Command concerning putting subsequent products
that are numbered out of the whole sample
T
-
Number of errors T (Lower than Qn –T) in the sample
2T
-
Number of errors 2T (Lower than Qn –2T) in the sample
Th. 1
- Sample
number
av.
-
Average mass of controlled goods
OK
-
Test results: OK. - positive, WRONG - negative
Test in progress
- Status
F5-End
-
Description of button terminating control
NET
-
Net mass of tested products
•
According to the command on the screen put on the weight pan
subsequent products and after stabilizing press
to send
subsequent measurements to the computer,
•
After completing a test control following data are displayed in the
workspace:
18.8. Empty – full control
For controls „empty-full” in computer software KTP NET in the product
settings users can set a measurement „charge”. The weighing program
during testing requires putting a charge of empty packages and then
a charge of the same packages filled with products put in the same
sequence.
45
Summary of Contents for Y/KTPS Series
Page 2: ...2 JANUARY 2011...
