RADWAG Y/KTPS Series, User Manual

Page: 30 / 53

Procedure:
•
Enter < Devices> according to ch.14 of the manual,
•
Choose „ Barcode Scanner / Code Length” then the screen
keyboard is displayed,
•
Write a new length and confirm it by pressing .
14.4. Transponder card reader
Depending on settings in PC software KTP NET, selecting (logging on) an
operator, after establishing connection with the computer, can be performed
by:
•
Typing a password on a keyboard,
•
Approaching a transponder card to the reader.
The card needs to be registered first.
Notice:
In case of problems with reading transponder cards check the submenu
< Communication> and set appropriate baud rate (default 9600b/s).
14.4.1. Com port for transponder card readers
Procedure:
•
Enter group of parameters < Devices> according to ch. 14
of this manual, select „ Transponder cards reader / Port”
and set appropriate option.
The scale can communicate with the reader via following ports:
•
RS 232 (COM1),
•
RS 232 (COM2).
30