Moderating a Videoconference Hosted by Another Scopia
XT Series
About this task
When you use the Scopia XT Series as an endpoint, you can moderate videoconferences hosted by an
external MCU or another endpoint with a built-in MCU. This functionality is only available if:
• The hosting endpoint or MCU supports H.243, which enables remote videoconference
management.
• You are not connecting to the videoconference via SIP.
You can do this procedure from the endpoint itself or from the XT Series web interface.
You can perform this procedure with your XT Remote Control Unit as described below, or using your
keyboard and mouse (for more information, see
Using the Keyboard and Mouse to Control the Scopia
on page 24).
Alternatively, to host the videoconference on your XT Series, see
Moderating a Hosted Videoconference
on page 83.
Important:
If the endpoint hosting the meeting does not support H.243, and your Scopia XT Series does not have
a built-in MCU, the
Meeting
option in the in-call menu is not available (see
page 73).
Procedure
1. Access the active videoconference:
• From the endpoint, press
ok/menu
on the XT Remote Control Unit and select
Participants
.
• From the XT Series web interface, select
Make your call > Meeting Call
.
Figure 66: Start moderating the videoconference from the endpoint interface
2. Select
Start Moderating
.
When approved by the meeting host, you become the meeting moderator and can manage
the meeting and its participants.
3. Select an endpoint to manage from the participant list.
User Guide for Scopia XT Executive Version 3.2
Hosting Videoconferences with the Built-in MCU | 86
