RADVision Scopia XT Series, User Manual

Page: 52 / 122

If you are dialing from the Contacts , Recent Calls , or Direct Call page, select Edit
next to the number you are calling (for more information about navigating to these
pages, see
Dialing a Number from the XT Series Web Interface on page 49).
Figure 34: Changing advanced call settings
2. Modify the call settings as described below.
From the endpoint interface, select options using arrow keys on XT Remote Control Unit and
confirm with the
ok/menu key .
You can perform this procedure with your XT Remote Control Unit as described below, or
using your keyboard and mouse (for more information, see
Using the Keyboard and Mouse
to Control the Scopia XT Executive on page 24).
Table 8: Advanced Calling Settings
Field Name Description
Call protocol If necessary, select the protocol to use when calling this
personal endpoint or meeting room:
•
H.323 : Select for H.323 endpoints, such as other XT
Series endpoints, or when joining a videoconference
hosted by a Scopia Elite MCU.
•
SIP : Select for SIP endpoints, such as when calling
Microsoft Lync clients.
•
ISDN : If enabled, select to call ISDN endpoints.
Call rate By default, the system uses either the maximum available
bandwidth or the rate you specified as the default call rate for
this contact (for details, see
Adding and Modifying Contacts
in the Phone Book on page 43).
Call type Select whether the call is Audio-Video or Audio-Only .
3. Dial the number, as follows:
• Using the XT Remote Control Unit, press , or select
Call and press ok/menu .
User Guide for Scopia XT Executive Version 3.2 Starting a Videoconference | 52