RADVision Scopia XT Series, User Manual

Page: 71 / 122

Figure 51: Showing the monitor in Pip, PaP, and PoP views
To change the layouts, see Changing the Video Layout During the Call on page 71.
Changing the Video Layout During the Call
About this task
A video layout is the arrangement of participant images as they appear on the monitor in a
videoconference. If the meeting includes a presentation, a layout can also refer to the arrangement of
the presentation image together with the meeting participants.
During the call, you can change your monitor’s current layout to the options described in Table 12: Video
layout options on page 71. To change the video layout for all participants when you are hosting a
videoconference from a Scopia XT Series MCU Edition, see Changing the Video Layout from the Scopia
XT Series MCU Edition on page 80.
For more information about video layouts in point-to-point calls, see About Video Layouts on page 69.
You can change the layout in one of the following ways:
•
Press the Layouts key on the XT Remote Control Unit repeatedly to switch between the full
screen, PoP, PaP, and PiP video layouts, described in Table 12: Video layout options on page
71.
Table 12: Video layout options
Layout Description
Fullscreen
The full screen view shows one video image. Typically, it displays
the remote presentation, or, if there is no presentation, it displays
your computer screen.
PoP
The PoP (Picture out Picture) view shows up to three images of
different size, presented side by side. The image on the left is
larger, with two smaller images on the right.
User Guide for Scopia XT Executive Version 3.2 During Your Videoconference | 71