4. On the XT Remote Control Unit, press the
*
and
#
keys simultaneously until the red led blinks
twice.
Figure 14: Setting the code on the XT Remote Control Unit
5. Using the keypad, type the number you just entered in the
Remote control code
field.
Important:
You must always use two digits for a code. For example, to set the code to “1”, enter “01”.
The code of the XT Remote Control Unit is changed and the Remote Control
icon with
the new Remote Control code appear at the top-right corner of the screen:
Important:
The code and icon do not appear when the default code,
01
, is used.
6. Set the code and exit by doing one of the following:
• In the web interface, select
Finish
.
• In the endpoint, press
OK
.
Using the Keyboard and Mouse to Control the Scopia XT Executive
About this task
You can fully integrate the Scopia XT Executive with your computer, using the Scopia XT Control utility.
The Scopia XT Executive display functions as your computer's monitor, and you can control the endpoint
with your keyboard and mouse.
User Guide for Scopia XT Executive Version 3.2
Getting Started | 24
