7
PREFACE
About this manual
This manual is written primarily for system engineers who will integrate the Procelerant
®
CE915GM COM Express™ embedded computing module into their own products.
See the following resources for information on the CE915GM modules not described in
this manual:
•
Installation and initial setup instructions.
the
Procelerant CE915GM COM Express
Module Quick Start Guide
provides the steps for assembling a COM Express system.
When referenced in this manual, the simplified name of
Quick Start Guide
will be
used.
•
BIOS configuration information.
The
Procelerant CE915GMA BIOS Setup Utility
Specification
describes the BIOS setup utility interfaces and configuration options.
When referenced in this manual, the simplified name of
BIOS Setup Utility
Specification
will be used.
•
Carrier design guidelines and thermal validation procedures.
The
Procelerant
CE915GM COM Express Carrier Board Design Guidelines
describes specific
considerations and guidelines for designing a carrier board to use with the COM
Express module.
When referenced in this manual, the simplified name of
Carrier Board Design
Guidelines
will be used.
•
Qualified memory list.
The
CE915GMA Qualified Memory List
provides the memory
modules RadiSys
®
has validated for use with COM Express modules.
When referenced in this manual, the simplified name of
Qualified Memory List
will be
used.
•
Firmware and software update information.
BIOS and driver updates may be
available for the COM Express module from time to time. Detailed procedures on
updating the firmware and software are included in the corresponding release
packages.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
