40
GB
FM Operation
Press MODE to select FM radio.
Auto Scan
While listening to an FM station, press SCAN on the remote control to perform auto scan.
Once a station has been found, the scanning will stop automatically.
Manual Tune
To tune FM frequency manually, turn SCROLL dial on the unit or press on the remote
control until your desired frequency is reached.
Each turn will adjust the frequency by 0.05MHz. If reception is still poor, adjust the
position of the DAB/FM aerial or try moving the radio to another location.
Scan Setting
In the SCAN SETTINGS menu you can choose if you want your radio to tune to ONLY the
strong stations or select NO and it will try to tune to all stations, however some may be very
weak.
1. In FM mode, press MENU to display the FM
menu.
2. Press to select Scan setting and then
press OK.
FM
Scan setting
Audio setting
Main menu
FM station scan
Strong stations only?
YES*
NO
You’ll now be asked if you want to scan for strong
stations only or not.
3. Press to select YES (strong stations only) or
NO (all stations) then press OK.
Audio Setting
If you find that the station you are listening is not clear, you can select to listen to it in
MONO this can often clear up some of the static.
1. In FM mode, press MENU to
display the FM menu.
2. Press to select Audio
setting and then press OK.
You’ll now be asked if you want to
listen in MONO only or not.
3. Press to select YES or NO
then press OK.
FM weak reception
Listen in Mono only?
YES*
NO
FM
Scan setting
Audio setting
Main menu
