RadioMaster TX16S, User Manual, Page: 50 / 59

50
The setting of the L01 example in the figure is expressed as follows: When the
return value A1 is less than 11.0V, the L01 switch is automatically turned on. In the
settings of other pages, L01 has the same function as the physical switch. You can
define the corresponding function for L01 on or off. In this way, a switch is
automatically executed according to the parameters that change in real time.
The remote control system provides 64 logic switches, each of which has three
judgment methods:
1. Compare the values of parameters a and b, a corresponds to V1, b corresponds
to V2, a and b can be any source, such as input source, channel, switch, or return item,
etc.
2. Compare the value of parameter a and data x, a corresponds to v1, x
corresponds to v2, and x is a fixed value, which is used to compare with parameter a
3. Parameter a can be compared with its own calculation result. For example, the
change of parameter a itself can affect the current state of the logic switch.
Functions
a=x
Triggered when the parameter v1 is equal to the data v2. For example, if
the thr gimbal is less than -90, the current logic switch is turned on
when the thr gimbal is less than -90%.
a～x
Triggered when the parameter v1 is approximately equal to the data v2,
approximately equal to the range of about 10%
a>x Triggered when parameter v1 is greater than data v2
a<x Triggered when parameter v1 is less than data v2