RadioMaster TX16S, User Manual, Page: 37 / 59

37
There are 8 flight modes plus the default FM0 available. The first item of FM1-
FM8 requires a trigger switch. When no switch is on, FM0 is enabled by default.
Name Define a name for the flight mode
Switch
Select the trigger switch for the flight mode. It can be a physical
switch or a logical switch.
Trim selection
array
Adjust the fine-tuning value of 1-6 channels according to your
actual needs
Fade in
Fade Out
Slow Ease In / Ease Out Time Settings
Check Flight
Mode Trims
At the bottom of the screen (below FM8) you are reminded to
check the fine-tuning of each flight mode. According to the
currently selected FM number, the corresponding reminder
message is displayed, for example, if the flight mode FM2 is
active, it will display "Check FM2 trims"
4.4.3. Input Source（Inputs）
The Inputs page defines the input source. Before outputting to the channel, you
can make preliminary settings for the input source, such as limiting the amount of
operation, increasing the curve, using the switch pair to switch, etc.
The input source can be a physical operation source such as a gimbal, knob, or
switch of the remote control, or it can be a global variable Gvar, a logical switch, return
data, etc.