Radio Thermostat CT102, User Manual

Page: 39 / 56

16
Customization
HVAC
SETUP
DIFF
SWING FILTER
PM
F
MATE
RADIO
1
CALIBRATE
RECOVERY ECON
SWING FILTER
PM
F
MATE
RADIO
1
TE CALIBRA ON PROGRAM
Menu Screen Functions
Time
Calibrate
˚F ˚C Set
Sound
Recovery
Econ Or Fast
HVAC Setup*
Lock
Filter
Swing
Program*
Differential
Mate
Set Time Of Day, Set Fº or Cº
Sound see
page
#
Swing (HVAC Cycling Rate)
This feature enables you to set the acceptable variance in
temperature between the CT102’s setting and the current room
temperature before the heating or cooling system will turn on. The
Swing range can be from 0.5 to 4.0F (.25 to 2C). For example, if Swing
is set to 2.0°F and the CT102 is set to 70°F target temperature, the
heat cycle will start when the room temperature drops to 68°F.
Similarly, the cooling system will start when the room temperature
increases to 72°F. The HVAC runs until the room reaches the target
temperature, and then shuts off.
To set Swing
1. From the Menu screen, touch Swing.
2. Touch Time Adjustment arrows to set the SWING from 0.5°
to 2.0°F. The HVAC will run more frequently at .5°F and less
frequently at 2°F. The default is 1°F.
3. Touch to return to the Menu screen.
Filter
To help you remember to replace your air filters, use the filter
replacement reminder count-down (in days). Setting this value to 0
disables the reminder.
Access MENU screen (see page 9 )
* These icons are not visible when the thermostat is connected to a Z-Wave network.
Menu Screen