Radio Shack TAD-268 Page 24 Owner'S Manual Download

Page: 24 / 52

Using the Handset

Follow these steps to record the outgo-
ing announcement from the handset.

1. If the TALK indicator is on, press

TALK

on the handset to turn it off.

2. Press

REMOTE

on the handset.

The HOLD/INT indicator on the
handset flashes for about a sec-
ond, then lights steadily.

Note: Wait until the HOLD/INT
indicator lights steadily before
continuing.

3. Press then

, then listen to the

handset. You hear beeps while
the TAD rewinds the tape for the
announcement backup. When the
tape fully rewinds, you hear a 2-
second beep.

4. Speak your outgoing announce-

ment into the handset. The TAD
records the announcement into
digital memory and onto the tape
at the same time.

5. When you finish your outgoing

announcement, press

on the

handset. You hear another 2-sec-
ond beep.

Note: If you do not press

within 21

seconds, the TAD automatically stops.

CHECKING THE
OUTGOING
ANNOUNCEMENT

You can use either the base or the
handset to check the outgoing an-
nouncement.

Using the Base

1. If the TALK indicator is on, press

TALK

on the handset to turn it off.

2. Press the button next to the

ANSWER indicator on the base.
The ANSWER or ANN ONLY indi-
cator turns on.

3. Press

ANNOUNCE RECORD

in the

cassette deck compartment. You
hear the TAD play the outgoing
announcement through the base’s
speaker.

Using the Handset

1. If the TALK indicator is on, press

TALK

on the handset to turn it off.

2. Press

REMOTE,

then

After a

second, you hear the TAD play
the outgoing announcement
through the handset.

43-738.fm Page 24 Friday, August 13, 1999 1:51 PM

Summary of Contents for TAD-268





















































Search results

Summary of Contents for TAD-268

Reviews:

Related manuals for TAD-268

Brands by name

Popular brands

Radio Shack TAD-268, Owner'S Manual

Search results

Summary of Contents for TAD-268

Reviews:

Related manuals for TAD-268

Brands by name

Popular brands