3
We recommend you record your sys-
tem’s serial number here. The number
is on the bottom of the answering sys-
tem.
Serial Number:
This system has been tested and
found to comply with all applicable UL
and FCC standards.
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
READ THIS FIRST
We have designed your system to
conform to federal regulations, and
you can connect it to most telephone
lines. However, each device you con-
nect to the phone line draws power
from the phone line. We refer to this
power draw as the device’s
ringer
equivalence number
, or REN. The
REN is on the bottom of your answer-
ing system.
If you are using more than one device
on the line, add up all the RENs. If the
total is more than five, your phones
might not ring and your answering
system might not answer. In rural ar-
eas, a total REN of three might impair
ringer operation. If ringer operation is
impaired, remove a device from the
telephone line.
FCC STATEMENT
Your answering system complies with
Part 68 of
FCC Rules
. You must, upon
request, provide the FCC registration
number and the REN to your phone
company. Both numbers are on the
bottom of your answering system.
Note: You must not connect your an-
swering system to:
• Coin-operated systems
• Party-line systems
• Most electronic key phone sys-
tems
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
WARNING: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
CAUTION
!
!
Summary of Contents for TAD-1018
Page 23: ...23 NOTES...
