background image

20

Recordings sound 
distorted.

You were too close to the 
microphone or you spoke 
too loudly when you record-
ed the outgoing message.

Record the message again. 
Speak clearly into the micro-
phone in a normal voice about 
12 inches away.

The tape head is dirty.

Clean the head using a tape 
head-cleaning kit (see “Clean-
ing the Tape-Handling Parts” 
on Page 22).

The tape is worn out.

Unplug the adapter from the 
AC outlet, replace the tape, 
then plug the adapter back into 
the AC outlet.

Remote control func-
tions do not work.

The correct remote opera-
tion security code was not 
entered.

 Enter the correct code.

You are using a pulse dial-
ing phone.

Use a touch-tone phone or 
pocket tone dialer.

The tone output from the 
phone or tone dialer is not 
long enough.

Press and hold the buttons for 
at least 

1

/

2

 second or try using 

another phone or dialer.

The telephone line is noisy.

Enter the remote operation se-
curity code again.

Seven seconds of silence 
have passed so the an-
swering system hangs up.

Call the answering system and 
try again.

Continuous tone 
sounds.

No outgoing message re-
corded.

Record an outgoing message 
(see “Recording the Outgoing 
Message” on Page 6).

The cassette tape is bro-
ken.

Unplug the adapter from the 
AC outlet, replace the tape, 
then plug the adapter back into 
the AC outlet.

The cassette tape is 
jammed.

Unplug the adapter from the 
AC outlet; remove, unjam, and 
reinstall the tape; then plug the 
adapter back into the AC outlet.

Problem

Cause

Solution

Summary of Contents for TAD-1018

























Reviews: