Radio Shack TAD-1018, Owner'S Manual

Page: 8 / 24

8
PLACING THE PHONE
ON A DESK TOP
To use your answering system on a
desk, table, or shelf, plug the tele-
phone cord into a modular phone jack.
Plug one end of the coiled handset
cord into the handset jack on the an-
swering system and the other end into
the jack on the handset. Place the
handset on the cradle.
MOUNTING THE PHONE
ON THE WALL
Using the supplied mounting bracket,
you can mount the TAD-1018 on a
phone jack wall plate or directly on the
wall.
If you are mounting the phone directly
on the wall, you need two screws with
heads that fit into the bracket’s key-
hole slots.
1. Pull the handset holder toward
you as far as it will go. Hold it out
as you rotate the holder 180°,
then let it snap back in place.
The holder’s tab holds the hand-
set in the cradle while the answer-
ing system is mounted on the wall.
2. To mount the TAD-1018 directly
onto the wall, drill two holes 3
1
/
4
inches apart, one above the other,
at the desired location.