68
Beyond the Basics
3. Press
e
or
d
to select the contrast.
4. Press
ENT
to set the display contrast.
cloning the programmed data
You can transfer the programmed data to and from
another PRO-2055 or PRO-97 scanner using an
optional connecting cable with 1/8-inch (3.5 mm)
phone plugs on both ends (not supplied, available at
your local RadioShack store).
“CLONE MODE” Incorrect Model
appears if the
scanner receives data from another scanner other
than a PRO-2055 or PRO-97.This scanner can
send/receive the data to or from a PRO-97 scanner.
Only the Light (PRO-97) and Dimmer (PRO-2055)
settings are not transferred, they are set to default.
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s
PC/IF jack.
**CLONE MODE** Press UP to send Remove
cable to exit.
appears.
3. Press
e
.
Confi rm to send data? 1 -> YES Press other key for
NO.
appears.
4. Press
1
to send the data to the other unit or press
any other key to cancel the operation.
The scanner sends the data. To exit the clone mode,
remove the cable.
Note
Note