![background image](http://html.mh-extra.com/html/radio-shack/pro-2055/pro-2055_user-manual_779398066.webp)
66
Beyond the Basics
DC – accesses the FM mode, DCS System
MO – accesses the FM Mode, Motorola Trunking
System (with 4- or 5-digit ID code)
ED – accesses the FM Mode, EDACS Trunking System
(with 4-digit decimal ID code or 5-digit AFS code)
LT – accesses the FM mode, LTR Trunking System (with
6-digit ID code)
MO (MOT), ED, and LT modes are not available
when the scanner tunes up or down through the
frequency ranges in which the trunking operation
is not used.
using the attenuator
To reduce interference or noise caused by strong
signals, you can reduce the scanner’s sensitivity to
these signals.
There are two attenuator modes in your scanner.
One is normal attenuator mode in which you set the
attenuator in each channel or each band/group in the
search and tune mode. The other is global mode in
which you set the attenuator only once. This setting is
applied all the time in every mode.
Press
ATT
to turn on or off the attenuator while the
channel number is indicated or while the scanner is
searching through bands/groups. When the attenuator
is on,
att
changes to
ATT
.
When you turn it off,
ATT
changes to
att
. You cannot set
the attenuator while the scanner is scanning.
Press
FUNC
and then
ATT
to set the attenuator to its
global mode.
Global ATT.
appears for 2 seconds at the
bottom line and
atg
appears. Press
ATT
to turn the
Notes
Notes