![background image](http://html.mh-extra.com/html/radio-shack/pro-2055/pro-2055_user-manual_779398056.webp)
56
Beyond the Basics
frequencies only. To change the all bands to police/fi re
or vice versa, press
FUNC
then
.
You can also turn on/off frequency sub-bands using the
corresponding number keys while Signal Stalker II is
active.
Priority mode is not available while using the
Signal Stalker II.
Press
FUNC
then
e
or
d
, you can change the normal
Signal Stalker II operation to the Special Signal Stalker
II operation. In the Special Stalker operation,
Sp.
Stalker
appears and the frequency range is divided by
1 MHz segment. If you lock out 5 frequencies within a
1 MHz segment, the scanner will skip that segment in
subsequent sweeps. See “Using Signal Stalker II with
Lockout” below.
using Signal Stalker II with lockout
The scanner’s lock out feature can be used to bypass
unwanted transmissions while using the Signal Stalker
II. Press
L/OUT
when the scanner is stopped on an
undesired transmission. Press
FUNC
L/OUT
to review or
clear locked out frequencies in the Signal Stalker II.
You can lock out 150 frequencies while searching all
bands and 50 frequencies while searching Police/Fire
frequencies.
Signal Stalker II functions by rapidly sweeping through
the RF spectrum in 1 MHz segments. If RF signal
energy is detected in a 1 MHz segment, Signal Stalker
II will sweep through the 1MHz segment in fi ner steps
until the source of the RF signal energy is found.
Certain segments of RF spectrum are used by high
power transmitters, such as paging transmitters. The
Signal Stalker II can detect these transmitters easily,
even at great distances due to their high transmitter
Notes
Notes