41
Beyond the Basics
Follow these steps to select preprogrammed search
bands and search them for active frequencies:
1. Repeatedly press
SRCH
to select your desired search
bank (SR0, SR1, SR2, SR3, SR4, SR5, or SR6).
2. In the marine, CB, and FRS/GMRS/MURS bands,
you can directly select a channel or search through
the band. When
MAN
appears at the right of the
third line, you can directly select a channel (refer to
“Band Charts”). Press the desired channel number
while
MAN
appears to select it. You can also change
the channels by pressing
e
or
d
.
3. Press
FUNC
then
SRCH
while
MAN
appears.
MAN
changes to
SRCH
and now you can search through
the band. Press
FUNC
then
SRCH
again to return to the
previous mode.
4. Rotate
SQ
clockwise and leave it set to a point just
after the rushing sound stops. After 2 seconds
(if the delay feature is on), the scanner starts
searching.
5. When the scanner fi nds an active frequency, it
stops searching.