![background image](http://html.mh-extra.com/html/radio-shack/pro-2055/pro-2055_user-manual_779398033.webp)
33
Beyond the Basics
code will receive all traffi c on the channel, and will
instantly decode and display any CTCSS or DCS code
that is found with the transmission. You can then
store the found code in the channel memory with one
keystroke.
This section of the manual describes the process for
confi guring a memory channel for CTCSS or DCS
operation and manually programming a known code.
For more information on using the CTCSS and DCS
feature while scanning, see “Using CTCSS and DCS”.
To program channel memories for CTCSS or DCS
operation, follow these steps:
1. First, enter a conventional frequency. See “Storing
Known Frequencies into Channels”.
2. Once you have entered the frequency, press
MODE
until the desired mode appears in the upper left
hand corner of the display. Use CT for CTCSS, and
DC for DCS.
3. By default, the search code (indicated with
Code
Search
in the bottom of the display) is programmed.
To program a specifi c code, press
FUNC
,
MODE
, and
then use the arrow keys to scroll to the desired
CTCSS or DCS code. You can also use the keypad
to enter the code manually. Note that the scanner
will automatically fi ll the code fi eld as you enter the
code.
4. Once the desired code is selected, press
ENT
to
store the code in the channel memory.
5. It is possible to program memory channels for
CTCSS or DCS operation at any time. Simply place