9
2. Attach the connector on the bat-
tery to the connector inside the
battery compartment.
3. Replace the battery compartment
cover.
After you connect the battery, you
must set up the base then charge the
battery.
INSTALLING THE TAPE
Follow these steps to install the sup-
plied microcassette tape.
1. Turn the supplied microcassette’s
hub with a pencil to take up any
tape slack.
2. Lift up on the left side of the cas-
sette compartment cover on top of
the base to open it.
3. Install the microcassette in the
cassette compartment with the
open edge of the cassette on the
left and the full reel toward the
front of the TAD.
Notes:
• You can buy additional microcas-
settes or microcassettes of a dif-
ferent length at your local Radio
Shack store.
• Replace the tape at least once a
year — more often if it is used
heavily.
CONNECTING TO
POWER
1. Insert the AC adapter’s barrel plug
into the
DC IN 7.5V
jack on the
back of the base, then thread the
supplied AC adapter’s cord
through the strain relief slot under
the base.
Note: Use only the supplied AC
adapter as your phone’s 7.5V DC
500 mA power source.
43-738.fm Page 9 Friday, August 13, 1999 1:51 PM
