27
2. Press
,
then
MEMORY
. The
HOLD/INT indicator blinks and a
beep sounds.
3. Press
7
then
#
.
4. Press
MEMORY
to store the new
setting. The HOLD/INT indicator
turns off and a long beep sounds.
5. Press the button next to the
ANSWER indicator on the base.
The ANN ONLY indicator on the
base turns on.
To reset the TAD to record incoming
messages, repeat Steps 1-5, but press
instead of
#
in Step 3.
SCREENING CALLS
To screen calls, let the TAD answer
the calls, then listen to the caller
through the base’s speaker. If you de-
cide to answer the call, lift the handset
from the cradle or press
TALK
, or pick
up a phone connected to the same
phone line as the TAD. The TAD stops
recording and resets for the next call.
Note: If you pick up the phone just as
the TAD answers, the TAD might not
stop announcing. If this happens, hang
up the phone momentarily, then pick it
up again.
43-738.fm Page 27 Friday, August 13, 1999 1:51 PM
