Radijator BIOmax Series, Manual

Page: 65 / 74

8.3 Start of work of boiler by solid fuel
If the user wants the operation of the Solid fuel boiler the following steps should be taken:
•
If the boiler had never been used on the pellets, but it is used for the first time using solid
fuel, then it is necessary to pull in a small amount of pellets into the chamber. In this, way
the so-called false air through the feeding channels is prevented.
•
Before the ignition, close the opening of the secondary air (
no air flow
) which is located
on the back of the boiler. (see Figure 16.)
!
On an occasion of restarting of the boiler pellet feeding
secondary air (Figure 16) to re-open.
Figure 16. Preview secondary air holes on the back boiler
•
When starting the boiler (by pressing the power key), it is necessary to switch on
automation mode WOOD.
Must first disable mode pellet (if included), so you will keep the command button 4 (+
symbol, more than 3sekunde), the display will appear Spe mark. Then you have to release
the button. Then press the command button 3 (sibol -, more than 3sekunde), the display
will appear Chc mark and blinking warning lights above the third command button Then
the boiler mode WOOD.
•
Through the lower doors to prepare a small amount of wood and potpaliti.Posle get a
larger flame add fuel.
•
The combustion of pellets does not cover the ash box and the like, because it is through
that area gets air required for combustion of wood or coal.