28
6.3
Troubleshooting
Mode
Alarming
Indication
Situation
To do
Standby
Status Indication
light:
Red blink
AED is turned off after 8 to 10
times of electric shock or
10min later since power-on
Replace the battery to new one
Audio message:
The battery is low, please
change the battery
immediately
Replace the battery to new one
Audio message:
System error 000X
Contact the vender for A/S
service
Power button is not working,
AED does not powered-on.
Replace the battery to new
one, if the battery is already
replaced within 3 years or new
one. Please contact the vender
for A/S service
Operating
Status
Indication light:
Red blink
Audio message:
The battery is low, please
change the battery
immediately
Replace the battery to new one
Audio message:
System error 000X
Contact the vender for A/S
service
Status Indication
light:
Blue blink
Audio message:
System will be terminated due
to disconnection of the pads
Connect AED pads’ connector
to AED firmly and properly
Audio message:
Plug the connector of the pad
to AED (repeat)
Do not attempt to disassemble or repair the AED arbitrarily
Do not attempt to disassemble the AED arbitrarily due to danger of electric
shock hazard when high voltage is recharged. RADIANQBIO is not responsible
for electric shock resulted from unauthorized disassembly or attempt to
repair. Please contact sales representative for defective AED