CHAPTER 8
34 Revision 02, January 2011
8.2.
Parts & Attachments
8.2.1. Handpiece
Replacement
The handpiece must be replaced every 20,000 pulses.
Remove the handpiece from the system and return it to your
Radiancy representative for a replacement.
Remove the handpiece by pressing down on the top button and
pulling straight out. Attach new handpiece according to directions
found in section
3.3.1.
8.2.2. Area Adaptors
The Area Adaptors are used when treating different size and shape
areas.
For hygienic reasons, clean the area adaptor between each client
with a soft, damp cloth, as you would the handpiece.
Figure 23: Area Adaptor
To install the Area Adaptor:
Hold the adaptor in one hand and the handpiece in the other. Place
the adaptor on the handpiece as shown in Figure 1.
Align the two tabs with the openings on the small ends of light unit.
Gently press until you hear a clicking sound signaling that the
adaptor is firmly in place.
To remove the Area Adaptor:
Hold the adaptor in one hand and the handpiece in the other
Gently pull off the adaptor
