Lap Pulse
When this option is enabled the
VBSS will output a 5 V pulse for 300
ms when a Start/Finish line is
crossed. The duration of the pulse in
milliseconds can be adjusted by
entering a different value.
The polarity of the pulse can be
changed to either a rising or falling
pulse by selecting the marker next
to the desired image.
Digital Input
You can use the Digital Input and a switch to program the position of virtual lines with the VBOX Speed Sensor. This lets
you set Start/Finish lines and Split lines. You can also use the Digital Input and a trigger device to set up a Brake
Trigger.
You can read more about how to configure the Digital Input and the 2 modes you can use it for
.
https://en.racelogic.support//Product_Info/Sensors/Single_and_Dual_Antenna_Speed_Sensors/VBOX_Speed_Sensor_User_Guide/
04_-_Speed_Sensor_Configuration
25
