background image

Racelogic Ltd 

 

Drift Mode   

  

 Page 

15 

 

 

Drift Mode Display Screens 

DriftBox has three different screens, available in each mode, which are selected by using 
the 

▲▼

buttons. 

 

This screen shows speed and drift-angle in real-time, as well 
as the peak drift angle achieved. 
Holding the reset button for 1.5s will reset the peak drift 
angle. 

Practice Mode Only 

This screen shows the peak drift angle, the speed at which it 
was achieved, the maximum lateral acceleration achieved, 
and the score awarded by DriftBox for the run.

 

Sectors Mode Only

 

Shows the peak drift angle, the speed at which it was 
achieved, the sector number, the score awarded by DriftBox 
for the run, and the cumulative score in brackets.

 

SPIN! is displayed if  the drift is greater than 100 degrees, or 
the drift is greater than 45 degrees with the speed<10 kmh.  

Resetting the screens 

In any of the Drift mode screens, the Peak, Average, Score and Speeds can be reset by 
pressing the 

RESET

 button for 1.5 s

Score Codes 

Scores are generated by DriftBox based on the performance of a drift, you can enter the 
DriftBox league with your own scores, but you will need the validation code to verify your 
score. You can enter this validation code onto the website under My DriftBox 

Æ

 My high 

score. 

Viewing the Score Code 

Validation codes are automatically saved to a file on the SD card called ‘Scores’.txt’, but 
you can also press the 

OK

 button to display a score code on the screen of DriftBox.

  

 

 

 

 

Summary of Contents for DriftBox
























































Reviews: