Racelogic Ltd
Performance Mode
Page
18
Performance Mode
The Performance mode is used to measure the acceleration and braking performance of
your vehicle. Press the
MODE
button to scroll to the Performance Mode screen. This
mode is divided into six screens, each of which displays different performance data.
Navigate between these screens by using the
▲▼
buttons. Each screen will automatically
display the results as they happen, e.g. if you drive from 0 Mph to 60 Mph then the 0-60
section will show the time taken.
Below is a list of the available Performance Mode display screens.
This Acceleration Screen displays a live velocity in the left
half and in the right it shows the times of the following preset
test ranges. 0 to 60, 0-100 and 0-100-0.
It also shows the maximum speed.
Acceleration 2 screen shows the 30-50 and 50-70 times.
However these two test ranges are user adjustable through
the setup menu. Peak lateral g (cornering force) is also
shown along with an average velocity value.
This screen shows the best results of the two test ranges
from each of the acceleration screens.
This screen shows the time and distance of two user
adjustable deceleration ranges. These test ranges can be
configured in the setup menu.
This screen shows the same information as the previous
Deceleration screen, but for a different user-defined speed
range.
This screen shows the time and end velocity of two preset
distances, i.e. 0-100m. If the units are changed to feet then
the two test ranges are 1/8 and 1/4mile.
This screen shows the time and end velocity of two preset
distances, i.e. 0-400m. If the units are changed to feet then
the two test ranges are 1/2 and 1 mile.
